How to deal with bag zipper problem

Oct 17, 2022

Leave a message

Bag zipper does not fit

1. Pull too tight. It often occurs in the zipper that has not been used for a long time or the new zipper, because the zipper is very astringent, and pulling it hard will deform the zipper teeth and damage the zipper. In this case, you can pull it softly and repeatedly for a few times, and it will become slippery.

2. Pull too hard. It will cause the teeth of the zipper to fall off. Once such a problem occurs, it is necessary to replace the zipper in time.

3. Too tight. It is easy to break the zipper. Once the zipper is too strong, the zipper will be scrapped.

4. The zipper is too astringent. It is the zipper wrinkle that makes the zipper jam, as long as you rub some candles, it is very easy to use.

5. Keep dry. Do not let the zipper be eroded by water. Although the zipper is not easy to rust, it will become astringent after being eroded by water. Rubbing the zipper with a candle can solve the problem.

6. Do not apply oil or oily substances to the zipper. It may be easy to use at the time, but the cloth tape contaminated with oil will absorb dust, and the zipper will be very astringent to use, and it will become more and more difficult to use. The oil on the tape must be washed off.

7. Prevent the zipper from contacting with acidic and alkaline substances. What zippers are most afraid of are these corrosive things, because of the nature of aluminum alloys. Once attacked by acid and alkaline substances, this zipper will not work well. It can be reused only by repeatedly rubbing it with a candle.


Bag zipper is broken

1. Metal zipper

Generally speaking, a broken metal zipper is easier to repair. For example, if the zipper of a leather bag is opened, you can re-install the zipper from the head. If there is still a problem

Then use a pair of vise to clamp the two sides of the zipper together with a little force. This method is suitable for one or two uses. The zipper will be directly disjointed if the number of times is exceeded, so that only the

Can get a new zipper.

2. Plastic zipper

The solution to a broken plastic zipper is to put a few drops of lubricating oil on the zipper, general oil is also fine. We know that oil has a lubricating effect. If the teeth of the zipper are not broken, it may be because of too much friction before the zipper. Of course, if you think the dripping method is too greasy, you can also use candles. Spread the candle evenly over the zipper and pull it again from the beginning. That's it. But be careful: Be sure not to use lubricating oil or the like, there will be oil stains where you put your wallet. And after wiping with soap, be sure to clean it, otherwise it will corrode the zipper.


Send Inquiry