Definition
The woven label is woven on the label loom by fixing the warp yarn and using the weft yarn to express text, graphics, letters, numbers, three-dimensional marks, color combinations, etc.
Classification
1. Weaving mark according to the process is mainly divided into weaving edge and cutting edge two kinds.
(1) Woven edge cloth label.
When the required trademark is woven out in accordance with the width of the need at one time, called woven edge trademark. This process avoids many disadvantages of cutting edge, but the output is low. Also has a flat / satin, characterized by a soft feel, quite. More suitable for higher apparel items, such as fashion, suits, etc., is very concerned about the quality of the Japanese manufacturers with the most, the machine is also Japan's to do the delicate. Woven edge label generally do satin label, but the satin base color is difficult to express, commonly used hot color / dyeing and other processes to solve this problem.
Weaving edge of the machine generally have a wooden shuttle machine, the color generally can not exceed four; there are crochet machines, the same can be woven out of a variety of process quality, and can even add transparent polyester yarn in the warp, called fish silk crochet machine. The cost composition of the fabric label is not only the width, the total length of each color, the process, but also the variety of yarn used.
(2) Cut edge fabric label.
As the name suggests, on a special high-speed machine, like weaving a whole woven cloth, and then cut into strips according to the width of the label. Because of the molten characteristics of polyester, the yarns will stick to each other when cutting, and will not fall apart. Because of this reason, the appearance and feel will be affected to a certain extent, good machine will be better, with ultrasonic cutting than the ordinary electric knife will be better. Strip of fabric labels, can be directly sorted and sent to the garment factory processing; if the requirements are strict, still need to be cut and folded processing. The maximum width of a single computerized jacquard component is 20cm, by increasing the number of jacquard components can weave a wider trademark, you can also process a larger shape.
2. According to the classification of product attributes can be divided into two categories: flat label and satin label.
(1) Plane label: cloth label such as cloth structure, simple a warp and a weft up and down interwoven called simple plane label. Generally speaking, the warp yarn is fixed, or black, or white, so there are black flat and white flat, light-colored base color label, generally with white flat, dark-colored generally with black flat. The pattern and color of the label are mainly expressed by the weft yarn, and the expressed color will be different because of the different effect of crossing with the warp yarn. Because of the limitation of the type of weft yarn used in general, the colors that can be expressed are also limited, generally within 8 kinds. From the above, the price is composed of: the width of the label, i.e. the amount of warp yarn used; the length of the label, and the length of each color along the warp direction. In order to express the details and colors more richly, all the weft yarn are doubled, called double-sided label, if a sample color needs to be more three-dimensional, and then add a heavy yarn, called heavy shuttle. Except for washing and sizing, most of the labels are flat and double-sided. Cloth label are yarn to express the pattern, there must be differences with the original plane design, so no small sample to confirm the impossibility of making large goods.
(2) Wrought surface label: cloth, are warp and weft cross-woven, in addition to the weft can be doubled to improve the quality, there are doubled by the warp yarn, this process is the satin structure. By doubling the warp yarn, the texture of the cloth label thus becomes soft and smooth. Because the warp yarn doubling is too dense, the weft yarn cannot express the pattern well and the bottom color cannot be made flexible. Only a certain color requirement can be revealed through the post-process. A machine set to do flat or satin, is generally relatively more fixed. Cutting edge satin general width can not exceed 10CM, weaving edge of the general will not exceed 5.0CM.
(3) Other woven label: there are such as size mark waist mark main mark, etc., these are in accordance with the use of the product to distinguish.
Woven Label price components: woven mark price is based on the material, the number of colors (that is, the type of color), specifications, after the process composition.
