What should I do if the chain bag is too long?
1. Find the materials first, find a buckle on the key chain, and prepare the chain and bag. Then cut the length of the chain, first connect the hook on one side of the bag to the chain.
2. Then, measure the required chain length, pinch this position with your hand, and hang the keychain on the pinch position, so that the length of the chain used will be intercepted.
3. Finally, put on the chain, hang the keychain on the connection of the other end of the bag, make sure to hang it firmly, put the extra chain in the bag, and fasten the hook at the end of the chain on the keychain, and this is done. .
How to deal with the discoloration of the chain of the chain bag
1. Do a good job of cleaning, and use metal cleaning agent to clean the surface of hardware such as chains. The cleaning agent here is special. If you are at home, you can use toothpaste to clean it, which is also very useful. Be sure to clean carefully with a cotton swab.
2. Then it will be polished. The chain and other hardware of the bag must be polished to show a new appearance. Therefore, after cleaning, it is polished. Take a small amount of professional polishing agent similar to toothpaste and apply it to the surface of the metal parts.
3. Then, under the grinding of the special polishing cloth, remove all the mottled gold plating on the metal surface to make the hardware surface smooth, and also to make the subsequent color plating more glossy.
4. After cleaning again, the residual polishing agent on the surface of the hardware must be completely removed. Use a cotton swab to clean it slowly and carefully, and rub it several times. Wait until the cotton swab is not dirty.
5. Carefully polish again, and use polished suede with a tighter fiber structure for secondary polishing to completely fill the defects on the hardware surface, and the link is the same.
6. The last step is to color-plating your bags and hardware accessories: use a dropper to drip the special electroplating solution on the cotton swab, connect the hardware to be colored to the cathode current clip of the color-plating equipment, and use a dipstick Take the plating pen of the plating solution and wipe it, and that's it.
7. Usually pay more attention to care, you can tie it with a ribbon or protect it; usually do the cleaning work yourself, and pay attention to the bag chain to maintain a brand-new appearance.
